TouchMix Self-Guided Tour 3
• Select “Default” under the Factory bank.
Press “Recall” in the lower left-hand corner
(Image 1.4). Now press “Home” button to get
back to your main faders and begin mixing.
• Select a Channel Fader (Image 1.5) by
touching it. Turn the Master Encoder
(Image 1.6) to adjust the channel volume level.
This “touch-and-turn” technique allows you
navigate quickly and make precise adjustments at
the same time. The tactile control of the Master-
Encoder is one of the many features that sets
TouchMix apart from other digital mixers. For ner
adjustments (like precise EQ frequency control)
press the knob while turning.
Image 1.5
Image 1.6
1. NAVIGATION (Cont’d)
Image 1.4
To Next Page
Loading...
