3
S A F E T Y P R E C A U T I O N S
Read ALL
Instructions before Installing or Using Equipment
XL-2000 Microson
Ultrasonic Homogenizer
Instruction Manual
Your new MicrosonUltrasonic Liquid Processor has been designed and tested to assure
maximum operator safety. However, no design can completely protect against improper
usage, which may lead to bodily injury and/or property damage. For total safety and
equipment protection, read the instruction manual carefully before attempting to operate this
equipment. Observe the following WARNINGS:
High voltage is present in the generator (power supply), convertor
and high frequency cable. Do NOT
attempt to remove the
generator cover or convertor case. Do not touch open connection
with power engaged.
Do NOT
operate generator with convertor disconnected.
The MicrosonUltrasonic Homogenizer must be properly
grounded with a 3-prong plug. Test electrical outlet for proper
grounding before plugging in unit.
Install the Microson in an area free from excessive dust, dirt, explosive and
corrosive fumes and from extreme temperature and humidity.
NEVER
touch a vibrating horn or probe.
NEVER
immerse the convertor in liquids of any kind.
Refer to the enclosed safety reminder.
To Next Page
Loading...
Need help?
General
