Qsonica MICROSON XL 2000 User Manual

5
SPECIFICATIONS
Generator
Dimensions: 33cm W x 19cm D x 17cm H (13" x 7.5" x 6.7")
Weight: 4.2 kg (9.2 lb.)
Input Voltage: 115 VAC nom. (switchable to 220 VAC nom.) 50/60 hz
Full Load Current: 1.65 amps at 115v/ 0.8 amps at 220v
Fuse Rating and Type: 3 amp/1.5 amp Fast acting
Voltage Tolerance: +/- 10% nominal voltage
Output Voltage/Frequency: 950 Vrms (maximum) 22.5 kc (nom)
Convertor
Dimensions: 17cm L x 3cm Dia. (6.7" L. x 1.18" Dia.) without probes
Weight: 0.2 kg (0.5 lb.)
Materials: Aluminum case and Front Driver
Environmental
Pollution Degree 1
Temperature Limits: 50q F - 110q F (10q C - 43q C)
Barometric Pressure: Unlimited (Note: In high vacuum areas, additional cooling provisions may
be needed. Contact factory)
Accessories
Use only accessories and probes listed in the catalog by the manufacturer as suitable for use
with this appliance. Do not attempt to fabricate ultrasonic tooling or accessories unless approval
has been obtained from the manufacturer in advance.

Qsonica MICROSON XL 2000 Specifications

General

Brand	Qsonica
Model	MICROSON XL 2000
Category	Computer Hardware
Language	English