49
Suggested Microplates, Pumps and Chillers and where to buy them:
Microtiter Plates
96 shallow-well microplate:
• 96-well Full Skirt PCR plate, 2ml, part #285096. Manufacturer: E&K Scientific (1-800-934-8114)
• Hard Shell™ Skirted Microplate, 96-well, part # HSP-9601. Manufacturer: MJ Research (1-888-
729-2165)
• 96-well Skirted Plate, part # 652270. Manufacturer: Greiner Bio-one (1-800-884-4703)
• Thermal Cycler Plate, 0.2ml, part # UP 2312. Manufacturer: United Laboratory Plastics (1-800-
722-2499)
• 96-23II reaction plate, part # N801-0560. Manufacturer: Applied Biosystems (1-800-327-3002)
384-well microplate:
• 384-well Polypropylene, small volume, part # 785201. Manufacturer: Greiner Bio-one (1-800-884-
4703)
1536-well microplate:
• 1536-well Polypropylene, part #782270P. Manufacturer: Greiner Bio-one (1-800-884-4703)
Deep-well microplate (the first two are the most recommended since they have vents):
• 96-well Masterblock Deep-well, part #780201. Manufacturer: Greiner BioOne (1-800-884-4703)
• Cluster Tube System, 1.2ml tubes, part #4412. Manufacturer: Corning (1-800-492-1110)
• Assay Block, 96-well, 0.5ml PP, part #3957. Manufacturer: Corning/Costar (1-800-492-1110)
• Assay Block, 96-well, 1ml PP, part #3959. Manufacturer: Corning/Costar (1-800-492-1110)
Chillers & Peristaltic Pumps
Thermo Fisher Catalog Chillers:
• Catalog #13-874-7, Model 3006, capacity 6L
• Catalog #22-037-157, Model WK-230 (Benchtop chiller), capacity 6L
Thermo Fisher Peristaltic Pumps:
• Watson-Marlow PumpPro, Catalog #14-283-2 (Standard), Catalog #14-283-3 (Economy), NOTE:
ask for two pump heads
• Manostat “Carter” Multichannel Pumps, Catalog #13-875-241. NOTE: ask for 2 channels that will
fit size 16 tubing or 1/8” ID tubing.
Cole Parmer Catalog Chillers:
• High-Stability Digital Bath, Catalog #A-12108-00 (Analog), #A-12108-01(Standard), #A-12108-20
(Digital), capacity 6L
• Julabo Refrigerated Circulating Baths, Catalog #
EW-15002-00 (Economy), Catalog EW-15002-04
(Digital), capacity 4.5L
Cole Parmer Catalog Peristaltic Pumps:
• Pump Heads (need 2) – Easy Load Pump Heads, Catalog #A-07518-00 for CRS rotor, PSF
housing, Catalog #A-07518-10 for SS rotor, PSF housing, Catalog #A-07518-60 for SS rotor, PPS
housing
• Pump Heads (need 2) – Easy Load II Pump Heads, Catalog #A-077200-50 for CRS rotor, PSF
housing, Catalog #A-077200-60 for SS rotor, PSF housing, Catalog #A-077201-60 for SS rotor,
PPS housing
• Pump Head (need 1) – Two channel Easy-Load II Pump Head, Catalog #A-77202-50 for CSR
rotor, Catalog #A-77202-60
• Pump Drive – L/S Variable speed Economy Console Drive, Catalog #A-07554-80, 7 to 200rpm For
the peristaltic pumps you’ll need to use size 16 tubing or 1/8” ID tubing.
To Next Page
Loading...
Need help?
General
