To Next PageTo Next PageWhy does my Qstarz eXtreme BT-Q818X BT-Q818eXtreme show no signal indoors?
If your Qstarz GPS BT-Q818eXtreme shows no signal indoors, it's likely due to a weak or non-existent GPS signal. To resolve this, move to an outdoor location where the GPS signal is stronger.
How to fix Qstarz eXtreme BT-Q818X GPS if no position output but timer is counting?
If your Qstarz GPS BT-Q818eXtreme isn't providing position output, but the timer is running, this indicates a weak or absent GPS signal. Try moving the device to a location with a clear view of the sky to improve signal reception.
Why can't I turn on the COM port for my Qstarz eXtreme BT-Q818X?
If you're unable to turn on the COM port for your Qstarz GPS BT-Q818eXtreme, it could be due to an incomplete installation or the COM port is already in use by another device. Ensure the BT-Q818eXtreme is completely installed. Alternatively, stop any other device currently utilizing the COM port.
What to do if I can't find Qstarz eXtreme BT-Q818X BT-Q818eXtreme?
If you cannot find the Qstarz GPS BT-Q818eXtreme, the issue might be due to a poor connection. Try restarting your PDA or PC and reinstalling the software.
Identifies the mini USB power input port on the GPS unit.
Describes the function of the mode switch for power and connection.
Explains the LED indicator for battery charge status.
Details the LED indicator for Bluetooth connectivity status.
Describes the LED indicator for GPS signal status.
Notes the presence of an internal GPS antenna.
Activate the Bluetooth function on your PDA/Smart phone or PC for pairing.
Automatically create a shortcut in the Bluetooth Manager window after pairing.
Confirm the assigned COM port after pairing with the receiver.
Install USB driver and connect for G-Mouse function via USB.
Configure the correct serial port in your navigation map software.
Procedure to switch off the GPS function and disconnect Bluetooth.
General
