Qtx C-BAR - DMX Operation; DMX 5 Channel Mode; DMX 8 Channel Mode

151.592UK User Manual
DMX operation
In order to access the full DMX functions, the DMX start
address will need to be set on the control panel.
When the display shows “”, this means that the C-BAR
is operated starting from DMX address 1.
When the display shows “”, this means that the C-BAR
is operated starting from DMX address 203. The start
address can be anywhere between 001 and 512.
There are 5 modes for DMX operation, which determine how
many channels are used to access the functions. Pressing
the MENU button until “” is displayed, press ENTER and
select from 5, 8, 14, 26 or 50 channel modes.
Some DMX channels initiate the internal colour chases,
which are detailed in the Colour Chase Table opposite
DMX 5 channel mode
Channel
Value
Function
1
0-255
Red 0-100%
2
0-255
Green 0-100%
3
0-255
Blue 0-100%
4
0-255
See Colour Chase Table
5
0-255
Chase speed slow to fast
DMX 8 channel mode
Channel
Value
Function
1
0-255
Master dimmer
2
0-255
Strobe
3
0-255
Red 0-100%
4
0-255
Green 0-100%
5
0-255
Blue 0-100%
6
0-255
Auto program
7
0-255
See Colour Chase Table
8
0-255
Chase speed slow to fast
Colour Chase Table
000-007
No function
008-022
Colour chase 01
023-037
Colour chase 02
038-052
Colour chase 03
053-067
Colour chase 04
068-082
Colour chase 05
083-097
Colour chase 06
098-112
Colour chase 07
113-127
Colour chase 08
128-142
Colour chase 09
143-157
Colour chase 10
158-172
Colour chase 11
173-187
Colour chase 12
188-202
Colour chase 13
203-217
Colour chase 14
218-232
Colour chase 15
233-247
Colour chase 16
248-255
Sound activated