19 04/217058-805F
Figure 19.1
14. Preparing Firebox for Non-Burn Season
• Frequency: Yearly
• By: Homeowner
a. Be sure the appliance is allowed to cool, has been
unplugged and the exhaust blower is off.
b. Remove all ash from the rebox and
vacuum thoroughly.
c. Paint all exposed steel, including cast-iron.
— Purchase paint from your local dealer.
— Must use a high-temperature paint made
specically for heating appliances.
12. Cleaning Convection Blower - Requires No
Lubrication
• Frequency: Yearly or more frequently depending on
Dust/Dirt build-up
• By: Homeowner or Qualied Service Technician
a. Be sure the appliance is allowed to cool and has
been unplugged.
b. Follow section on Side Curtain Replacement on
page 24 for direct access to the convection blower.
c. Sweep or vacuum out any build-up. Use a brush or
compressed air to loosen dirt if needed.
13. Cleaning the Top Vent Adapter
• Frequency: Yearly or more frequently depending on
ash build-up
• By: Homeowner
a. The appliance must be in complete shutdown
and the exhaust blower should be off. Allow the
appliance to completely cool down.
b. Open the clean-out cover (Figure 19.1).
c. Sweep or vacuum out any ash build-up.
To Next Page
Loading...
