EasyManua.ls Logo

Quadro 3 - Page 36

Quadro 3
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34
Fig. 01
QSI0018
Fig. 02
QSI0020
4.10 RIGHT HANDLEBAR SWITCHES
Hazard Flashers Switch «2»
To activate your vehicle’s hazard flashers, push the switch «2» forward.
Headlight Switch «1»
With the key-operated ignition switch in «ON» position and by placing
the switch «1» in «B» position, the parking lights are activated.
The low beams are activated by placing the switch «A» position.
As per rules of the road make sure to move even in the daytime with the
lights switched on position.
Starter button «3»
The starter button «3» operates the electric starter. For the starter to
operate the ignition switch must be turned to the «ON» position and the
front brake lever must be pulled to the handlebar.
4.11 IGNITION KEYS
Your vehicle is delivered from the factory with two identical keys.
In addition to operating the steering lock/ignition switch, the ignition key
is required to operate the seat lock and fuel tank cap.
IT IS HIGHLY RECOMMENDED THAT THE TWO KEYS
ARE STORED SEPERATELY.
(Fig. 01)
(Fig. 02)
VEHICLE DESCRIPTION

Related product manuals