Quadro WM-1242 LCD - User Manual

MODEL:
SERVICE MANUAL
White goods
Electronic washing machines
WM-1042 LCD
WM-1242 LCD

Summary

Disassembly Procedures

Motor and Tub Main Body

Automatic Failure Detection System

Spinning Process Issues

Troubleshooting for delayed or non-existent spinning due to load balancing.

E-1 Error: Door Not Shut Properly

Instructions for addressing the E-1 error code related to the door.

General Troubleshooting (Zastoj; Greška)

Machine Not Operating

Steps to resolve when the washing machine does not start or function.

Water Filling Issues

Diagnosing and fixing water intake problems.

Water Drainage Issues

Troubleshooting drainage failures.

Excessive Machine Vibration

Vibration due to Load Imbalance

Excessive Foam Problems

Poor Washing Performance

Poor Wash Results

Immediate Water Drainage

Delayed or Absent Spin Cycle

Automatic Failure Detection System (Error Codes)

E-1 Error: Door Not Properly Closed

Instructions for the E-1 error code when the door is not shut correctly.

E-2 Error: Water Level and Supply

Troubleshooting for low water level or supply pressure.

E-3 Error: Pump or Filter Fault

Instructions for cleaning the pump filter or addressing pump failure.

E-4 Error: Excessive Water Condition

Procedure for handling excessive water and drainage.

E-5 Error: Heater or Sensor Failure

Steps for heater or heat sensor failure, including contacting service.

E-6 Error: Motor Failure

Procedure for motor failure, involving unplugging and contacting service.

E-7;E-8 Errors: Network Voltage

Information on voltage fluctuations affecting machine operation.

Practical Information

Troubleshooting Minor Malfunctions

Quadro WM-1242 LCD Specifications

General

Capacity	12 kg
Spin Speed	1400 RPM
Energy Rating	A+++
Color	White
Display Type	LCD