To Next PageTo Next PageWhat to do if my Qualcast QGTP25 Trimmer does not start?
If your Qualcast Trimmer isn't starting, first check the fuel level. Then, inspect the spark plug; if it's sooted or damp, clean or replace it. Also, make sure the blade or Nylon cutter is correctly reassembled. If these steps don't resolve the issue, follow the instructions for starting.
Why does my Qualcast QGTP25 engine smoke excessively?
If your Qualcast Trimmer engine smokes excessively, the problem might be due to an incorrect fuel mix. Make sure you are using the correct fuel mix as specified in the fuel mixing table.
Why does my Qualcast Trimmer start but not develop its full power?
If your Qualcast Trimmer starts but lacks full power, the choke lever setting might be incorrect; adjust it to the correct position. Also, a soiled air filter can cause this issue, so try cleaning it. Consider having the cutting blade re-sharpened or replaced.
How to fix Qualcast QGTP25 Trimmer engine that does not run smoothly?
If the engine of your Qualcast Trimmer does not run smoothly, the spark plug might have an incorrect electrode gap. Clean the spark plug and adjust the electrode gap, or replace it with a new one.
What to do if the temperature of Qualcast Trimmer is too high?
If the temperature of your Qualcast Trimmer is too high, it might be because the engine is overloaded. Ensure you rest the machine at regular intervals to prevent overheating.
General| Power | 250W |
|---|---|
| Cutting width | 25cm |
| Corded/Cordless | Corded |
| Power Source | Electric |
| Grass Collection | No |
Read all safety warnings and instructions. Failure to follow may result in serious injury.
Keep manual safe, read instructions, keep children away, and be aware of operator age.
Do not allow children/untrained use, avoid poor ventilation, clear work area.
Operate safely, secure hair, keep bystanders away, avoid fatigue, poor lighting, and overreaching.
Instructions for positioning and attaching the handle holder on the shaft.
Steps to connect the lower shaft part to the main shaft using a stop pin and knob.
Instructions for removing screws and fitting the safety guard securely.
How to place and secure the harness over the shoulder for safe operation.
Safety warnings and procedure for safely filling the fuel tank with a petrol/oil mix.
Safety checks and steps to start the engine of the trimmer.
How to release and cut the cutting line automatically using the 'Tap & Go' head.
How to extend the cutting line using the 'Tap & Go' method by tapping the spool.
Explains various techniques for using the trimmer for different tasks.
Recommended maintenance tasks like cleaning/replacing air filter and spark plug based on usage.
Situations like striking an object or sudden motor stop that require professional inspection.
Step-by-step guide to removing and fitting a new cutting line spool.
How to clean the equipment with a damp cloth before storage.
General advice on storing the grass trimmer in a safe, dry place.
Detailed steps for preparing the equipment for long-term storage, including draining fuel.
Steps to prepare the machine for use after it has been stored.
Safety notes regarding transporting the equipment, ensuring it's free of oil and gas.
