10
Turn the key to red, all numbers are allowed to be dialed out.
* Emergency numbers starting with "1" such as 10111, 10177 can be dialled on both lock positions.
NOTES
Please unplug the telephone line when replacing the batteries.
TROUBLESHOOTING TIPS:
No Dial Tone * Check hook switch to make sure it pops up
Can’t dial out * Make sure Tone/Pulse is set to correct position according to telephone
exchange requirement
* Unplug the phone, wait 30 seconds and plug the phone back in
* Check the phone line cord
* Check that all connectors are firmly inserted in their sockets.
Phone does not ring * Check the phone line cord
* Could have too many phones on one line (the total REN of all phones
should not be greater than the maximum for your area, usually 5).
* Check if ring tone is set to “Off State”
Last number redial don’t * When you first make a call try pressing the Pause Button for a
work on a PABX pause between the outside line access digit (eg: 9 or 0) and the
telephone number, you should later be able to redial the number.
* If your PABX requires you to wait for a second dial tone before
dialling the telephone number, press the Pause Button for a
pause between the access digit and number.
LCD is dim * Check if the batteries need replacing
* Check if the contrast is set correctly
To Previous Page
Loading...