5
RECEIVING A CALL
1. On receipt of an incoming call, the telephone rings, and the LCD displays the caller’s number,
the date, time, incoming number and the NEW icon.
2. If the same number is received again, and the previous call has not been reviewed, the LCD
displays REP icon.
When the incoming memory is full, the latest incoming number replaces the oldest number in
the memory.
NOTE: For the phone to display incoming numbers and other information, you must have
an active Caller Identification subscription with your service provider.
¾ From handset
1. Pick up the handset and talk to the other party.
2. To end the call, return the handset to the base.
¾ Switching to speakerphone
1. When using the handset, press
key and return the handset to the base.
2. To end the call, press
key again.
¾ From speakerphone
1. When the telephone rings, press key and talk to the caller. For the other party to hear your
voice clearly, speak into the speaker from a distance of not more than 32cm.
2. To end the call, press key again.
MAKING A CALL
¾ From handset
1. Pick up the handset.
2. When you hear dial tone, dial the desired number.
3. The telephone will start to time the conversation after 6 seconds.
4. To end the call, return the handset to the base.
¾ From Speakerphone
1. press key.
2. When you hear dial tone, dial the desired number.
3. The telephone will start to time the conversation after 6 seconds.
4. To end the call, press key again.
¾ Pre-dialing function
1. When the handset is on the base, dial the desired number.
2. If a mistake is made, use the DEL button to edit the number.
3. press key or pick up the handset and the number will be dialed automatically.
¾ Redial
1. Pick up the handset or press key
2. Press the REDIAL button, the last dialed number will be dialed again.
To Next Page
Loading...