Turning on the system
1. Connect the power adapter cable to the DC jack (DC IN) of the QutePC-1000
2. Connect the power cable to the power adapter
3. Connect the power cable to a power outlet
4. Press the power switch on the front panel to turn on the system
Figure 6 Turing on the system
Mounting your PC to a monitor
1. Secure the VESA mounting kit to your monitor with four screws.
Figure 7 VESA mounting (1)
NOTE
To fasten the metal shelf, your monitor must comply with VESA75 or VESA100
standard. The VESA mounting kit is optional.
To Next Page
Loading...
