Quanmax QutePC-1000 User Manual

Chapter 3
30
QutePC-1000 User’s Manual
Bootup Num-Lock [On]
Allow you to select the power-on state for the NumLock.
Options: Off, On
Wait for ‘F1’ If Error [Enabled]
When set to Enabled, the system waits for F1 key to be pressed when error occurs.
Options: Disabled, Enabled
Hit ‘DEL’ Message Display [Enabled]
When set to Enabled, the system displays the message ‘Press DEL to run Setup’ during POST.
Options: Disabled, Enabled
 Chipset Menu
Table 9 Chipset Menu
BIOS SETUP UTILITY
Main
Advanced Boot
Chipset
Power Security Exit
Chipset Settings
DRAM Frequency [Auto]
Internal Graphics Mode Select [Enabled, 8MB]
DVMT Mode Select [DVMT Mode]
DVMT/FIXED Memory [128M]
Options
Auto
400 MHz
533 MHz
<> Select Screen
↑↓ Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
V02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
DRAM Frequency [Auto]
Options: Auto, 400 MHz, 533MHz
Internal Graphics Mode Select [Enabled 8MB]
Select the amount of system memory used by the Internal graphics device.
Options: Enabled 1MB, Enabled 8MB
DVMT Mode Select [DVMT Mode]
Options: Fixed Mode, DVMT Mode, Combo Mode
DVMT/FIXED Memory [128MB]
Options: 64MB, 128MB, Maximum DVMT

Quanmax QutePC-1000 Specifications

General

Brand	Quanmax
Model	QutePC-1000
Category	Desktop
Language	English