Quantex ScanDoc Compact - Introduction

Introduction
Use
A multi car diagnostic scanner ScanDoc Compact is used for the information
readout from the car engine control modules (ECM) via the diagnostic outlet
OBD-II.
Functionality
• Reading and error codes decoding.
• Errors reset.
• Display of current data both in digital and graphical formats.
• Final controlling drives actuation.
• Systems identication (controlling units).
• Immobilizer device reading and programming.
Available Interfaces
• Russian.
• English.
• German.
• Greek.
Hardware specication
• CPU: 32bit, 72 MHz.
• RAM: 32 МB.
• Protocols hardware support: KL-Line, 2xCAN, VPW, PWM, J1708.
• Protocols software support: KW71, KW81, KW82, KW1284, DS2, ISO8,
ISO14230, ISO9141, ISO15765, J1979, J1850, TP2.0, J1939.
• Integrated electronic commutation: 13 channels.
• Connection with РС: WI-FI IEEE 802.11b 100 mV (54 Mb/s).
• Power supply: 9-30 V DC.
Service and operation conditions
• Operating temperature: 0-50°C.
• Maximum relative humidity: 80% (up to 30°С) and 50% (at 40°C and
higher).
• Any liquids inside the device are inadmissible .
General characteristics
• Scanner dimensions: 24х44х93 mm.
• Weight: 67 gram.
3
QUANTEX GmbH 2014