10
QUANTEX GmbH 2014
ScanDoc program description
Program settings
The section Options contains 3 subsections, connected to the device operation
and program settings.
System
This tab is for the program system settings. It contains the basic information on
the scanner connected (the serial number, type, IP-address, database version, etc.),
and can update its rmware, run the connection test, view the log-les folder and
activate the device.
Database version:
Make sure you use the latest database version. New program version can be al-
ways downloaded from the corresponding section at our site: www.quantexlab.com
Serial number:
To Next Page
Loading...