Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
CLI Error Codes 107
E1303 Directory is empty.
E1304 Directory entry was not found.
E1400 File: Failed to create a new file.
E1401 File: Failed to open.
E1402 File: Failed to open for read.
E1403 File: Failed to open for write.
E1404 File: Failed to open for append.
E1412 File: Failed to read data
E1413 File: Failed to write data
E1414 File: Failed to delete file.
E1415 File: Failed to copy file.
E1416 File: Failed to acquire write-lock on file.
E1417 File: Failed to acquire read-lock on file.
E1418 File: Failed to back up file.
E1419 File: Failed to restore backup file.
E1420 File is empty.
E1421 File is read-only.
E1422 File does not exist.
E1423 File has incorrect permissions
E1424 File has no specified section
E1425 File: Failed to rename.
E1426 Filename is missing.
E1430 File: Failed to open log file.
E1431 File: Failed to open syscli.log.
E1432 File: Failed to open signal.log.
E1450 Unable to send signal to process
E1451 Unable to get process ID
E1452 Invalid process ID
E1453 Destination process is not running
E1454 Process name is missing
E1500 Program aborted by interrupt signal
Error Code Error Message
To Next Page
Loading...
