Quantum DXi V1000 - Page 148

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
140 CLI Error Codes
E1015201 SetSmbsetting: Option "set" is missing.
E1015202 SetSmbsetting: Option "set" requires a value
E1015203 SetSmbsetting: Option "set" has invalid value
E1015204 SetSmbsetting: Failed to read/get option "set".
E1015205 SetSmbsetting: Failed to write/set option "set".
E1015211 SetSmbsetting: Option "oplocks" is missing.
E1015212 SetSmbsetting: Option "oplocks" requires a value
E1015213 SetSmbsetting: Option "oplocks" has invalid value
E1015214 SetSmbsetting: Failed to read/get option "oplocks".
E1015215 SetSmbsetting: Failed to write/set option "oplocks".
E1015216 SetSmbsetting: Specified option is not supported!
E1015221 SetSmbsetting: Option "dbglevel" is missing.
E1015222 SetSmbsetting: Option "dbglevel" requires a value
E1015223 SetSmbsetting: Option "dbglevel" has invalid value
E1015224 SetSmbsetting: Failed to read/get option "dbglevel".
E1015225 SetSmbsetting: Failed to write/set option "dbglevel".
E1015231 SetSmbsetting failed!
E1015232 SetSmbsetting: Failed to change smb setting!
E1015233 SetSmbsetting: Failed to change option "debug level"!
E1015234 SetSmbsetting: Failed to change smb parameter!
E1015291 SetSmbsetting: Failed to read/get option "nocheck".
E1015292 SetSmbsetting: Failed to write/set option "nocheck".
E1015301 SetSmbsetting: Option "ldapsigning" is missing.
E1015302 SetSmbsetting: Option "ldapsigning" requires a value
E1015303 SetSmbsetting: Option "ldapsigning" has invalid value
E1015304 SetSmbsetting: Failed to read/get option "ldapsigning".
E1015305 SetSmbsetting: Failed to write/set option "ldapsigning".
E1015311 SetSmbsetting: Option "maxprocesses" is missing.
E1015312 SetSmbsetting: Option "maxprocesses" requires a value
E1015313 SetSmbsetting: Option "maxprocesses" has invalid value
E1015314 SetSmbsetting: Failed to read/get option "maxprocesses".
Error Code Error Message