Quantum DXi V1000 - Page 149

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
CLI Error Codes 141
E1015315 SetSmbsetting: Failed to write/set option "maxprocesses".
E1015321 SetSmbsetting: Option "section" is missing.
E1015322 SetSmbsetting: Option "section" requires a value
E1015323 SetSmbsetting: Option "section" has invalid value
E1015324 SetSmbsetting: Failed to read/get option "section".
E1015325 SetSmbsetting: Failed to write/set option "section".
E1015331 SetSmbsetting: Option "name" is missing.
E1015332 SetSmbsetting: Must specify the name of an SMB parameter
after "--name".
E1015333 SetSmbsetting: The name specified after "--name" is an
invalid SMB parameter.
E1015334 SetSmbsetting: Failed to read/get option "name".
E1015335 SetSmbsetting: Failed to write/set option "name".
E1015341 SetSmbsetting: Option "value" is missing.
E1015342 SetSmbsetting: Must specify a value of the specified SMB
parameter after "--value".
E1015343 SetSmbsetting: The value specified after "--value" is not valid
for the specified SMB parameter.
E1015344 SetSmbsetting: Failed to read/get option "value".
E1015345 SetSmbsetting: Failed to write/set option "value".
E1015351 SetSmbsetting: Option "clientntlmv2auth" is missing.
E1015352 SetSmbsetting: Option "clientntlmv2auth" requires a value
E1015353 SetSmbsetting: Option "clientntlmv2auth" has invalid value
E1015354 SetSmbsetting: Failed to read/get option "clientntlmv2auth".
E1015355 SetSmbsetting: Failed to write/set option "clientntlmv2auth".
E1015361 SetSmbsetting: Option "serversigning" is missing.
E1015362 SetSmbsetting: Option "serversigning" requires a value
E1015363 SetSmbsetting: Option "serversigning" has invalid value
E1015364 SetSmbsetting: Failed to read/get option "serversigning".
E1015365 SetSmbsetting: Failed to write/set option "serversigning".
E1015601 Cifs: Option "cifs" is missing.
E1015602 Cifs: Failed to read/get option "cifs".
E1015603 Cifs: Failed to write/set option "cifs".
Error Code Error Message