Quantum DXi V1000 - Page 159

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
CLI Error Codes 151
E2000802 EditVtl: Option "edit" requires a value
E2000803 EditVtl: Option "edit" has invalid value
E2000804 EditVtl: Failed to read/get option "edit".
E2000805 EditVtl: Failed to write/set option "edit".
E2000811 EditVtl: Option "name" is missing.
E2000812 EditVtl: Option "name" requires a value
E2000813 EditVtl: Option "name" has invalid value
E2000814 EditVtl: Failed to read/get option "name".
E2000815 EditVtl: Failed to write/set option "name".
E2000821 EditVtl: Option "model" is missing.
E2000822 EditVtl: Option "model" is required because another optional
option is specified!
E2000823 EditVtl: Option "model" requires a value
E2000824 EditVtl: Option "model" has invalid value
E2000825 EditVtl: Failed to read/get option "model".
E2000826 EditVtl: Failed to write/set option "model".
E2000831 EditVtl: Option "slots" is missing.
E2000832 EditVtl: Option "slots" is required because another optional
option is specified!
E2000833 EditVtl: Option "slots" requires a value
E2000834 EditVtl: Option "slots" has invalid value
E2000835 EditVtl: Failed to read/get option "slots".
E2000836 EditVtl: Failed to write/set option "slots".
E2000841 EditVtl: Option "drives" is missing.
E2000842 EditVtl: Option "drives" is required because another optional
option is specified!
E2000843 EditVtl: Option "drives" requires a value
E2000844 EditVtl: Option "drives" has invalid value
E2000845 EditVtl: Failed to read/get option "drives".
E2000846 EditVtl: Failed to write/set option "drives".
E2000851 EditVtl: Option "startbackup" is missing.
E2000852 EditVtl: Option "startbackup" is required because another
optional option is specified!
Error Code Error Message