Quantum DXi V1000 - Page 160

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
152 CLI Error Codes
E2000853 EditVtl: Option "startbackup" requires a value
E2000854 EditVtl: Option "startbackup" has invalid value
E2000855 EditVtl: Failed to read/get option "startbackup".
E2000856 EditVtl: Failed to write/set option "startbackup".
E2000861 EditVtl: Option "endbackup" is missing.
E2000862 EditVtl: Option "endbackup" is required because another
optional option is specified!
E2000863 EditVtl: Option "endbackup" requires a value
E2000864 EditVtl: Option "endbackup" has invalid value
E2000865 EditVtl: Failed to read/get option "endbackup".
E2000866 EditVtl: Failed to write/set option "endbackup".
E2000871 EditVtl: Option "drivemodel" requires a value
E2000872 EditVtl: Option "drivemodel" has invalid value
E2000873 EditVtl: Failed to read/get option "drivemodel".
E2000874 EditVtl: Failed to write/set option "drivemodel".
E2000901 EditVtl failed!
E2000902 No VTLs exist
E2000903 Error retrieving the VTL info list
E2000904 !Specified VTL is missing
E2000905 Error retrieving info for VTL
E2000906 VTL must be offline to edit
E2000907 Error setting library type
E2000908 Error setting number of slots
E2000909 Error setting number of drives
E2000910 Error retrieving the drive info list
E2000911 Error removing more drives than existing drives
E2000912 Error deleting device mappings for drive
E2000913 Dedup not enabled, cannot change start and end backup
time.
E2000914 No colon specified in Start backup time.
E2000915 No colon specified in End backup time.
E2000916 Unable to change backup window
Error Code Error Message