Quantum DXi V1000 - Page 190

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
182 CLI Error Codes
E3007271 AddTargetrep: Option "sourceip" is missing.
E3007272 AddTargetrep: Option "sourceip" requires a value
E3007273 AddTargetrep: Option "sourceip" has invalid value
E3007274 AddTargetrep: Failed to read/get option "sourceip".
E3007275 AddTargetrep: Failed to write/set option "sourceip".
E3007276 AddTargetrep: Option "encrypt" is required because another
optional option is specified!
E3007301 AddTargetrep failed!
E3007601 DelTargetrep: Option "del" is missing.
E3007602 DelTargetrep: Option "del" requires a value
E3007603 DelTargetrep: Option "del" has invalid value
E3007604 DelTargetrep: Failed to read/get option "del".
E3007605 DelTargetrep: Failed to write/set option "del".
E3007611 DelTargetrep: Option "hostid" is missing.
E3007612 DelTargetrep: Option "hostid" requires a value
E3007613 DelTargetrep: Option "hostid" has invalid value
E3007614 DelTargetrep: Failed to read/get option "hostid".
E3007615 DelTargetrep: Failed to write/set option "hostid".
E3007651 DelTargetrep: Failed to get the current source hostids.
E3007652 DelTargetrep: The IP or hostname doesn't exist.
E3007701 DelTargetrep failed!
E3007702 DelTargetrep failed, must pause replication service before
deleting target hostid.
E3008001 EnablerepVtl: Option "enablerep" is missing.
E3008002 EnablerepVtl: Option "enablerep" requires a value
E3008003 EnablerepVtl: Option "enablerep" has invalid value
E3008004 EnablerepVtl: Failed to read/get option "enablerep".
E3008005 EnablerepVtl: Failed to write/set option "enablerep".
E3008011 EnablerepVtl: Option "name" is missing.
E3008012 EnablerepVtl: Option "name" requires a value
E3008013 EnablerepVtl: Option "name" has invalid value
E3008014 EnablerepVtl: Failed to read/get option "name".
Error Code Error Message