Quantum DXi V1000 - Page 191

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
CLI Error Codes 183
E3008015 EnablerepVtl: Failed to write/set option "name".
E3008021 EnablerepVtl: Option "daily" is missing.
E3008022 EnablerepVtl: Option "daily" requires a value
E3008023 EnablerepVtl: Option "daily" has invalid value
E3008024 EnablerepVtl: Failed to read/get option "daily".
E3008025 EnablerepVtl: Failed to write/set option "daily".
E3008026 EnablerepVtl: Option "daily" is required because another
optional option is specified!
E3008031 EnablerepVtl: Option "cartbase" is missing.
E3008032 EnablerepVtl: Option "cartbase" has invalid value
E3008033 EnablerepVtl: Failed to read/get option "cartbase".
E3008034 EnablerepVtl: Failed to write/set option "cartbase".
E3008041 EnablerepVtl: Option "syncid" is missing.
E3008042 EnablerepVtl: Option "syncid" requires a value
E3008043 EnablerepVtl: Option "syncid" has invalid value
E3008044 EnablerepVtl: Failed to read/get option "syncid".
E3008045 EnablerepVtl: Failed to write/set option "syncid".
E3008051 EnablerepVtl: Failed to get enable status.
E3008052 EnablerepVtl: This VTL is already enabled.
E3008061 EnablerepVtl: Option "hourinterval" is required because
another optional option is specified!
E3008062 EnablerepVtl: Option "hourinterval" requires a value
E3008063 EnablerepVtl: Option "hourinterval" has invalid value
E3008064 EnablerepVtl: Failed to read/get option "hourinterval".
E3008065 EnablerepVtl: Failed to write/set option "hourinterval".
E3008066 EnablerepVtl: Option "hourinterval" is required because
another option has been specified!
E3008071 EnablerepVtl: Option "starttime" requires a value
E3008072 EnablerepVtl: Option "starttime" has invalid value
E3008073 EnablerepVtl: Failed to read/get option "starttime".
E3008074 EnablerepVtl: Failed to write/set option "starttime".
E3008075 EnablerepVtl: Option "starttime" is required because another
optional option is specified!
Error Code Error Message