Quantum DXi V1000 - Page 192

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
184 CLI Error Codes
E3008076 EnablerepVtl: Option "starttime" is required because another
option has been specified!
E3008101 EnablerepVtl failed!
E3008401 DisablerepVtl: Option "disablerep" is missing.
E3008402 DisablerepVtl: Option "disablerep" requires a value
E3008403 DisablerepVtl: Option "disablerep" has invalid value
E3008404 DisablerepVtl: Failed to read/get option "disablerep".
E3008405 DisablerepVtl: Failed to write/set option "disablerep".
E3008411 DisablerepVtl: Option "name" is missing.
E3008412 DisablerepVtl: Option "name" requires a value
E3008413 DisablerepVtl: Option "name" has invalid value
E3008414 DisablerepVtl: Failed to read/get option "name".
E3008415 DisablerepVtl: Failed to write/set option "name".
E3008421 DisablerepVtl: Option "nodaily" is missing.
E3008422 DisablerepVtl: Failed to read/get option "nodaily".
E3008423 DisablerepVtl: Failed to write/set option "nodaily".
E3008431 DisablerepVtl: Option "nocartbase" is missing.
E3008432 DisablerepVtl: Failed to read/get option "nocartbase".
E3008433 DisablerepVtl: Failed to write/set option "nocartbase".
E3008451 DisablerepVtl: Failed to get enable status.
E3008452 DisablerepVtl: This VTL is already disabled.
E3008501 DisablerepVtl failed!
E3008801 EnablerepNas: Option "enablerep" is missing.
E3008802 EnablerepNas: Option "enablerep" requires a value
E3008803 EnablerepNas: Option "enablerep" has invalid value
E3008804 EnablerepNas: Failed to read/get option "enablerep".
E3008805 EnablerepNas: Failed to write/set option "enablerep".
E3008811 EnablerepNas: Option "name" is missing.
E3008812 EnablerepNas: Option "name" requires a value
E3008813 EnablerepNas: Option "name" has invalid value
E3008814 EnablerepNas: Failed to read/get option "name".
E3008815 EnablerepNas: Failed to write/set option "name".
Error Code Error Message