Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
234 CLI Error Codes
E6003232 Nodemanage: Failed to read/get option "resetdiag".
E6003233 Nodemanage: Failed to write/set option "resetdiag".
E6003241 Nodemanage: Option "node" requires a value
E6003242 Nodemanage: Option "node" has invalid value
E6003243 Nodemanage: Failed to read/get option "node".
E6003244 Nodemanage: Failed to write/set option "node".
E6003251 Nodemanage failed!
E6003252 Nodemanage: Error determiming the first node ID.
E6003253 Nodemanage: Error determiming the last node ID.
E6003254 Nodemanage: Error determiming the local node ID.
E6003255 Nodemanage: Failed to start node as IPMI is not supported .
E6003256 Nodemanage: Failed to restart node as IPMI is not
supported.
E6003257 Nodemanage: Invalid NodeID.
E6003258 Nodemanage: Unkown Error.
E6003259 Nodemanage: The event handler is already registered.
E6003260 Nodemanage: There are no event handlers registered.
E6003261 Nodemanage: An error occurred while performing a system
call.
E6003262 Nodemanage: The file could not be found.
E6003263 Nodemanage: The buffer size is too small.
E6003264 Nodemanage: Not enough memory available to perform the
operation.
E6003265 Nodemanage: An error occurred while posting an event.
E6003266 Nodemanage:Invalid argument.
E6003267 Nodemanage:Failed to join the node to the cluster.
E6003268 Nodemanage:The node is already joined to the cluster.
E6003269 Nodemanage:Failed to unjoin the node from the cluster.
E6003270 Nodemanage:The node is already unjoined from the cluster.
E6003271 Nodemanage:The node is in a transient state.
E6003272 Nodemanage:Failed to reboot the node.
E6003273 Nodemanage:Failed to shutdown the node.
Error Code Error Message
To Next Page