Quantum DXi V1000 - Page 244

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
236 CLI Error Codes
E6003302 Nodemanage:The number of SMITH counts has been
exceeded.
E6003303 Nodemanage:The number of STOMITH counts has been
exceeded.
E6003304 Nodemanage:Blockpool verification in process. Cannot
reboot,shutdown or reset the nodes.
E6003601 GenDiaglog: Option "gen" is missing.
E6003602 GenDiaglog: Option "gen" requires a value
E6003603 GenDiaglog: Option "gen" has invalid value
E6003604 GenDiaglog: Failed to read/get option "gen".
E6003605 GenDiaglog: Failed to write/set option "gen".
E6003611 Gendiaglog: Failed to read/get option "system".
E6003612 Gendiaglog: Failed to write/set option "system".
E6003621 GenDiaglog: Failed to read/get option "quiet".
E6003622 GenDiaglog: Failed to write/set option "quiet".
E6003631 GenDiaglog: Failed to read/get option "lastgen".
E6003632 GenDiaglog: Failed to write/set option "lastgen".
E6003651 Gendiaglog failed!
E6003661 Gendiaglog: The system is transient state. Cannot generate
logs.
E6003662 Gendiaglog: Error running the collect script.
E6003663 Gendiaglog: No generated log exists.
E6003664 Gendiaglog: Cannot open output file to determine status.
E6003665 Gendiaglog: The tool to collect requested log is not available.
E6003681 GenDiaglog: Option "system" is required because another
optional option is specified!
E6003691 GenDiaglog: Option "array" is required because another
optional option is specified!
E6003692 GenDiaglog: Failed to read/get option "array".
E6003693 GenDiaglog: Failed to write/set option "array".
E6004001 DownloadDiaglog: Option "download" is missing.
E6004002 DownloadDiaglog: Option "download" requires a value
E6004003 DownloadDiaglog: Option "download" has invalid value
E6004004 DownloadDiaglog: Failed to read/get option "download".
Error Code Error Message