Quantum DXi V1000 - Page 260

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
252 CLI Error Codes
E6500411 Runcmd: Option "cmd" is missing.
E6500412 Runcmd: Option "cmd" has invalid value
E6500413 Runcmd: Failed to read/get option "cmd".
E6500414 Runcmd: Failed to write/set option "cmd".
E6500421 Runcmd: Option "option" has invalid value
E6500422 Runcmd: Failed to read/get option "option"
E6500423 Runcmd: Failed to write/set option "option".
E6500451 Runcmd failed!
E6552001 AddEvent: Option "sched" is missing.
E6552002 AddEvent: Option "sched" requires a value
E6552003 AddEvent: Option "sched" has invalid value
E6552004 AddEvent: Failed to read/get option "sched".
E6552005 AddEvent: Failed to write/set option "sched".
E6552011 AddEvent: Option "desc" is missing.
E6552012 AddEvent: Option "desc" requires a value
E6552013 AddEvent: Option "desc" has invalid value
E6552014 AddEvent: Failed to read/get option "desc".
E6552015 AddEvent: Failed to write/set option "desc".
E6552016 AddEvent: Option "desc" must be unique (another event is
already using this name).
E6552021 AddEvent: Option "throttle" is missing.
E6552022 AddEvent: Option "throttle" requires a value
E6552023 AddEvent: Option "throttle" has invalid value
E6552024 AddEvent: Failed to read/get option "throttle".
E6552025 AddEvent: Failed to write/set option "throttle".
E6552031 AddEvent: Option "service" is missing.
E6552032 AddEvent: Option "service" requires a value
E6552033 AddEvent: Option "service" has invalid value
E6552034 AddEvent: Failed to read/get option "service".
E6552035 AddEvent: Failed to write/set option "service".
E6552041 AddEvent: Option "start" is missing.
E6552042 AddEvent: Option "start" requires a value
Error Code Error Message