Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
CLI Error Codes 253
E6552043 AddEvent: Option "start" has invalid value
E6552044 AddEvent: Failed to read/get option "start".
E6552045 AddEvent: Failed to write/set option "start".
E6552046 AddEvent: Start time cannot be in the past.
E6552051 AddEvent: Option "end" requires a value
E6552052 AddEvent: Option "end" has invalid value
E6552053 AddEvent: Failed to read/get option "end".
E6552054 AddEvent: Failed to write/set option "end".
E6552055 AddEvent: End date/time must be after start date/time.
E6552061 AddEvent: Failed to read/get option "daily".
E6552062 AddEvent: Failed to write/set option "daily".
E6552071 AddEvent: Option "weekly" requires a value
E6552072 AddEvent: Option "weekly" has invalid value
E6552073 AddEvent: Failed to read/get option "weekly".
E6552074 AddEvent: Failed to write/set option "weekly".
E6552081 AddEvent: Failed to read/get option "monthly".
E6552082 AddEvent: Failed to write/set option "monthly".
E6552091 AddEvent: Option "monthday" requires a value
E6552092 AddEvent: Option "monthday" has invalid value
E6552093 AddEvent: Failed to read/get option "monthday".
E6552094 AddEvent: Failed to write/set option "monthday".
E6552101 AddEvent: Failed to read/get option "yearly".
E6552102 AddEvent: Failed to write/set option "yearly".
E6552111 AddEvent: Option "yearday" requires a value
E6552112 AddEvent: Option "yearday" has invalid value
E6552113 AddEvent: Failed to read/get option "yearday".
E6552114 AddEvent: Failed to write/set option "yearday".
E6552121 AddEvent: Option "interval" requires a value
E6552122 AddEvent: Option "interval" has invalid value
E6552123 AddEvent: Failed to read/get option "interval".
E6552124 AddEvent: Failed to write/set option "interval".
Error Code Error Message
To Next Page