Quantum DXi V1000 - Page 262

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
254 CLI Error Codes
E6552131 AddEvent: Option "until" requires a value
E6552132 AddEvent: Option "until" has invalid value
E6552133 AddEvent: Failed to read/get option "until".
E6552134 AddEvent: Failed to write/set option "until".
E6552135 AddEvent: Until date/time must be after start date/time.
E6552136 AddEvent: Until date/time must be after end date/time.
E6552141 AddEvent: Option "count" requires a value
E6552142 AddEvent: Option "count" has invalid value
E6552143 AddEvent: Failed to read/get option "count".
E6552144 AddEvent: Failed to write/set option "count".
E6552151 AddEvent: Option "recurstr" requires a value
E6552152 AddEvent: Option "recurstr" has invalid value
E6552153 AddEvent: Failed to read/get option "recurstr".
E6552154 AddEvent: Failed to write/set option "recurstr".
E6552161 AddEvent: An optional option is required because another
optional option has been specified!
E6552250 AddEvent failed!
E6552401 ListEvents: Option "get" is missing.
E6552402 ListEvents: Option "get" requires a value
E6552403 ListEvents: Option "get" has invalid value
E6552404 ListEvents: Failed to read/get option "get".
E6552405 ListEvents: Failed to write/set option "get".
E6552411 ListEvents: Option "type" requires a value
E6552412 ListEvents: Option "type" has invalid value
E6552413 ListEvents: Failed to read/get option "type".
E6552414 ListEvents: Failed to write/set option "type".
E6552421 ListEvents: Option "start" requires a value
E6552422 ListEvents: Option "start" has invalid value
E6552423 ListEvents: Failed to read/get option "start".
E6552424 ListEvents: Failed to write/set option "start".
E6552431 ListEvents: Option "end" requires a value
E6552432 ListEvents: Option "end" has invalid value
Error Code Error Message