Quantum DXi V1000 - Page 278

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
270 CLI Error Codes
E7050833 SetDatetime: Failed to read/get option "time".
E7050834 SetDatetime: Failed to write/set option "time".
E7050835 SetDatetime: Specifying both "date" and "time" options is
required.
E7050841 SetDatetime: Option "timeformat" requires a value
E7050842 SetDatetime: Option "timeformat" has invalid value
E7050843 SetDatetime: Failed to read/get option "timeformat".
E7050844 SetDatetime: Failed to write/set option "timeformat".
E7050845 SetDatetime: Failed to set timeformat.
E7050851 SetDatetime: Option "timezoneid" requires a value
E7050852 SetDatetime: Option "timezoneid" has invalid value
E7050853 SetDatetime: Failed to read/get option "timezoneid".
E7050854 SetDatetime: Failed to write/set option "timezoneid".
E7050855 SetDatetime: Failed to set timezone.
E7050856 SetDatetime: No timezone exists with the given timezone ID.
E7050857 SetDatetime: Option "time" is required because another
optional option is specified!
E7050871 SetDatetime: Option "time" is required because another
option has been specified!
E7050872 SetDatetime: Option "date" is required because another
option has been specified!
E7050881 SetDatetime failed!
E7051201 ListNtpserver: Option "list" is missing.
E7051202 ListNtpserver: Option "list" requires a value
E7051203 ListNtpserver: Option "list" has invalid value
E7051204 ListNtpserver: Failed to read/get option "list".
E7051205 ListNtpserver: Failed to write/set option "list".
E7051221 ListNtpserver failed!
E7051601 ListTimezone: Option "list" is missing.
E7051602 ListTimezone: Option "list" requires a value
E7051603 ListTimezone: Option "list" has invalid value
E7051604 ListTimezone: Failed to read/get option "list".
E7051605 ListTimezone: Failed to write/set option "list".
Error Code Error Message