Quantum DXi V1000 - Page 279

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
CLI Error Codes 271
E7051611 ListTimezone: Option "matching" requires a value
E7051612 ListTimezone: Option "matching" has invalid value
E7051613 ListTimezone: Failed to read/get option "matching".
E7051614 ListTimezone: Failed to write/set option "matching".
E7051621 ListTimezone failed!
E8000001 Invalid SNMP name
E8000401 ListSnmptrapdest: Option "list" is missing.
E8000402 ListSnmptrapdest: Option "list" requires a value
E8000403 ListSnmptrapdest: Option "list" has invalid value
E8000404 ListSnmptrapdest: Failed to read/get option "list".
E8000405 ListSnmptrapdest: Failed to write/set option "list".
E8000406 ListSnmptrapdest: Failed to retrive trap destunation list.
E8000407 ListSnmptrapdest: No traps have been configured.
E8000421 ListSnmptrapdest failed!
E8000801 AddSnmptrapdest: Option "add" is missing.
E8000802 AddSnmptrapdest: Option "add" requires a value
E8000803 AddSnmptrapdest: Option "add" has invalid value
E8000804 AddSnmptrapdest: Failed to read/get option "add".
E8000805 AddSnmptrapdest: Failed to write/set option "add".
E8000811 AddSnmptrapdest: Option "ipaddress" is missing.
E8000812 AddSnmptrapdest: Option "ipaddress" requires a value
E8000813 AddSnmptrapdest: Option "ipaddress" has invalid value
E8000814 AddSnmptrapdest: Failed to read/get option "ipaddress".
E8000815 AddSnmptrapdest: Failed to write/set option "ipaddress".
E8000816 AddSnmptrapdest: Value of option "ipaddress" is too long
E8000821 AddSnmptrapdest: Option "name" is missing.
E8000822 AddSnmptrapdest: Option "name" requires a value
E8000823 AddSnmptrapdest: Option "name" has invalid value
E8000824 AddSnmptrapdest: Failed to read/get option "name".
E8000825 AddSnmptrapdest: Failed to write/set option "name".
E8000826 AddSnmptrapdest: Value of option "name" is too long
Error Code Error Message