Quantum DXi V1000 - Page 280

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
272 CLI Error Codes
E8000831 AddSnmptrapdest: Option "enable" is missing.
E8000832 AddSnmptrapdest: Option "enable" requires a value
E8000833 AddSnmptrapdest: Option "enable" has invalid value
E8000834 AddSnmptrapdest: Failed to read/get option "enable".
E8000835 AddSnmptrapdest: Failed to write/set option "enable".
E8000874 AddSnmptrapdest: Failed to validate IPAddress
E8000875 AddSnmptrapdest: Failed to validate trap name
E8000876 AddSnmptrapdest error retrieving list of configured trap
destinations
E8000877 AddSnmptrapdest: Trap already exists with the given
IPaddress
E8000878 AddSnmptrapdest: No trap destinations are configured".
E8000879 AddSnmptrapdest: Cannot configure more than 5 trap
destinations.
E8000891 AddSnmptrapdest failed!
E8001201 EditSnmptrapdest: Option "edit" is missing.
E8001202 EditSnmptrapdest: Option "edit" requires a value
E8001203 EditSnmptrapdest: Option "edit" has invalid value
E8001204 EditSnmptrapdest: Failed to read/get option "edit".
E8001205 EditSnmptrapdest: Failed to write/set option "edit".
E8001211 EditSnmptrapdest: Option "ipaddress" is missing.
E8001212 EditSnmptrapdest: Option "ipaddress" requires a value
E8001213 EditSnmptrapdest: Option "ipaddress" has invalid value
E8001214 EditSnmptrapdest: Failed to read/get option "ipaddress".
E8001215 EditSnmptrapdest: Failed to write/set option "ipaddress".
E8001216 EditSnmptrapdest: Value of option "ipaddress" is too long
E8001221 EditSnmptrapdest: Option "name" is missing.
E8001222 EditSnmptrapdest: Option "name" requires a value
E8001223 EditSnmptrapdest: Option "name" has invalid value
E8001224 EditSnmptrapdest: Failed to read/get option "name".
E8001225 EditSnmptrapdest: Failed to write/set option "name".
E8001226 EditSnmptrapdest: Value of option "name" is too long
Error Code Error Message