Quantum DXi V1000 - Page 287

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
CLI Error Codes 279
E8050037 Confignetseg: ALL_1 BONDING with no SEGMENTATION
requires a BONDIP, BIPNETMASK and ETH7IP, EIP7NETMASK.
E8050038 Confignetseg: ALL_1 BONDING with no SEGMENTATION
requires a BIPNETMASK for BONDIP & EIP7NETMASK for
ETHIP7.
E8050039 Confignetseg: ALL bonding requires a BONDIP and
BIPNETMASK
E8050051 Networking: Option "hostname" is empty.
E8050052 Networking: Option "hostname" is too long.
E8050053 Networking: Option "hostname" is invalid.
E8050054 Networking: Option "hostname" has invalid first character.
E8050055 Networking: Option "hostname" can not begin with space.
E8050056 Networking: Option "hostname" can not end with space.
E8050057 Networking: Option "hostname" contain consequetive
spaces.
E8050060 Networking: Network policy is invalid
E8050061 Networking: Network policy not supported
E8050062 Networking: Network policy address not found
E8050063 Networking: Failed to get network policy address
E8050064 Networking: still waiting for DHCP response
E8050070 Failed to get hostname!
E8050071 Hostname is not defined!
E8050072 Failed to get domainname!
E8050073 Domainname is not defined!
E8050074 CliListEthPorts: Failed to get name and speed for all ethernet
ports!
E8050075 CliListEthPorts: Failed to get max number of bonds for this
model!
E8050076 CliListEthPorts: Failed to get /opt/DXi/<MODEL>-
Network.conf file!
E8050077 CliListEthPorts: Failed to get /sys/class/net/ethX/operstate file!
E8050078 CliListBonds: Failed to get bond masters for Ethernet port!
E8050079 CliListBonds: Failed to get bond owner for Ethernet port!
E8050080 CliListBonds: Failed to get /sys/class/net/bondX/operstate file!
Error Code Error Message