Quantum DXi V1000 - Page 291

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
CLI Error Codes 283
E8051213 GetstatusJumbo: Failed to read/get option "dev".
E8051214 GetstatusJumbo: Failed to write/set option "dev".
E8051215 GetstatusJumbo: Option "dev" is missing.
E8051221 GetstatusJumbo: Option "all" is missing.
E8051222 GetstatusJumbo: Failed to read/get option "all".
E8051223 GetstatusJumbo: Failed to write/set option "all".
E8051226 GetstatusJumbo: Option "sid" requires a value
E8051227 GetstatusJumbo: Option "sid" has invalid value
E8051228 GetstatusJumbo: Failed to read/get option "sid".
E8051229 GetstatusJumbo: Failed to write/set option "sid".
E8051251 GetstatusJumbo failed!
E8051252 Device specified not found.
E8051253 GetJumboFrame not implemented yet!
E8051254 SetJumboFrame not implemented yet!
E8051601 SetnetworkUnsegmented: Option "setnetwork" is missing.
E8051602 SetnetworkUnsegmented: Option "setnetwork" requires a
value
E8051603 SetnetworkUnsegmented: Option "setnetwork" has invalid
value
E8051604 SetnetworkUnsegmented: Failed to read/get option
"setnetwork".
E8051605 SetnetworkUnsegmented: Failed to write/set option
"setnetwork".
E8051611 SetnetworkUnsegmented: Option "ip" is missing.
E8051612 SetnetworkUnsegmented: Option "ip" requires a value
E8051613 SetnetworkUnsegmented: Option "ip" has invalid value
E8051614 SetnetworkUnsegmented: Failed to read/get option "ip".
E8051615 SetnetworkUnsegmented: Failed to write/set option "ip".
E8051621 SetnetworkUnsegmented: Option "netmask" is missing.
E8051622 SetnetworkUnsegmented: Option "netmask" requires a value
E8051623 SetnetworkUnsegmented: Option "netmask" has invalid value
E8051624 SetnetworkUnsegmented: Failed to read/get option
"netmask".
Error Code Error Message