Quantum DXi V1000 - Page 290

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
282 CLI Error Codes
E8050805 DisableJumbo: Failed to write/set option "disable".
E8050811 DisableJumbo: Option "bond0" is required because another
optional option is specified!
E8050812 DisableJumbo: Failed to read/get option "bond0".
E8050813 DisableJumbo: Failed to write/set option "bond0".
E8050814 DisableJumbo: Failed to write/set option "dev".
E8050821 DisableJumbo: Option "bond1" is required because another
optional option is specified!
E8050822 DisableJumbo: Failed to read/get option "bond1".
E8050823 DisableJumbo: Failed to write/set option "bond1".
E8050831 DisableJumbo: Option "dev" requires a value
E8050832 DisableJumbo: Option "dev" has invalid value
E8050833 DisableJumbo: Failed to read/get option "dev".
E8050834 DisableJumbo: Option "dev" is missing.
E8050841 DisableJumbo: Option "sid" is missing.
E8050842 DisableJumbo: Option "sid" requires a value
E8050843 DisableJumbo: Option "sid" has invalid value
E8050844 DisableJumbo: Failed to read/get option "sid".
E8050845 DisableJumbo: Failed to write/set option "sid".
E8050901 DisableJumbo failed!
E8050902 DisableJumbo: Device specified not found.
E8050903 DisableJumbo: Unable to create information needed to
enable jumbo frame.
E8050904 DisableJumbo: Failed to disable jumbo frame. Unable to
change the MTU.
E8050905 DisableJumbo: Jumbo frame already disabled.
E8051201 GetstatusJumbo: Option "getstatus" is missing.
E8051202 GetstatusJumbo: Option "getstatus" requires a value
E8051203 GetstatusJumbo: Option "getstatus" has invalid value
E8051204 GetstatusJumbo: Failed to read/get option "getstatus".
E8051205 GetstatusJumbo: Failed to write/set option "getstatus".
E8051211 GetstatusJumbo: Option "dev" requires a value
E8051212 GetstatusJumbo: Option "dev" has invalid value
Error Code Error Message