Quantum DXi V1000 - Page 314

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
306 CLI Error Codes
E8061603 ListThrottle: Option "list" has invalid value
E8061604 ListThrottle: Failed to read/get option "list".
E8061605 ListThrottle: Failed to write/set option "list".
E8061611 ListThrottle: Option "devname" requires a value
E8061612 ListThrottle: Option "devname" has invalid value
E8061613 ListThrottle: Failed to read/get option "devname".
E8061614 ListThrottle: Failed to write/set option "devname".
E8061661 ListThrottle failed!
E8100001 Failed to open the /opt/DXi/theSeer/UnifiedNetwork.conf file.
E8100401 SetHostname: Option "set" is missing.
E8100402 SetHostname: Option "set" requires a value
E8100403 SetHostname: Option "set" has invalid value
E8100404 SetHostname: Failed to read/get option "set".
E8100405 SetHostname: Failed to write/set option "set".
E8100411 SetHostname: Option "name" is missing.
E8100412 SetHostname: Option "name" requires a value
E8100413 SetHostname: Option "name" has invalid value
E8100414 SetHostname: Failed to read/get option "name".
E8100415 SetHostname: Failed to write/set option "name".
E8100421 SetHostname: Option "sid" is missing.
E8100422 SetHostname: Option "sid" requires a value
E8100423 SetHostname: Option "sid" has invalid value
E8100424 SetHostname: Failed to read/get option "sid".
E8100425 SetHostname: Failed to write/set option "sid".
E8100431 SetHostname failed!
E8101201 ListEthdev: Option "list" is missing.
E8101202 ListEthdev: Option "list" requires a value
E8101203 ListEthdev: Option "list" has invalid value
E8101204 ListEthdev: Failed to read/get option "list".
E8101205 ListEthdev: Failed to write/set option "list".
E8101211 ListEthdev: Option "sid" requires a value
Error Code Error Message