Quantum DXi V1000 - Page 315

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
CLI Error Codes 307
E8101212 ListEthdev: Option "sid" has invalid value
E8101213 ListEthdev: Failed to read/get option "sid".
E8101214 ListEthdev: Failed to write/set option "sid".
E8101231 ListEthdev failed!
E8101241 ListEthdev: Unable to get the first ethernet device.
E8101242 ListEthdev: Unable to get the next ethernet device.
E8101601 ListBond: Option "list" is missing.
E8101602 ListBond: Option "list" requires a value
E8101603 ListBond: Option "list" has invalid value
E8101604 ListBond: Failed to read/get option "list".
E8101605 ListBond: Failed to write/set option "list".
E8101611 ListBond: Option "label" requires a value
E8101612 ListBond: Option "label" has invalid value
E8101613 ListBond: Failed to read/get option "label".
E8101614 ListBond: Failed to write/set option "label".
E8101621 ListBond: Option "sid" requires a value
E8101622 ListBond: Option "sid" has invalid value
E8101623 ListBond: Failed to read/get option "sid".
E8101624 ListBond: Failed to write/set option "sid".
E8101631 ListBond failed!
E8101651 ListBond: No bonded device found.
E9000401 ListPttinitiator: Option "list" is missing.
E9000402 ListPttinitiator: Option "list" requires a value
E9000403 ListPttinitiator: Option "list" has invalid value
E9000404 ListPttinitiator: Failed to read/get option "list".
E9000405 ListPttinitiator: Failed to write/set option "list".
E9000421 ListPttinitiator failed!
E9000801 ListPort: Option "list" is missing.
E9000802 ListPort: Option "list" requires a value
E9000803 ListPort: Option "list" has invalid value
E9000804 ListPort: Failed to read/get option "list".
Error Code Error Message