Quantum DXi V1000 - Page 319

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
CLI Error Codes 311
E9003614 ListTapedrive: Failed to read/get option "serialnumber".
E9003615 ListTapedrive: Failed to write/set option "serialnumber".
E9003616 ListTApedrive: Unable to get tape drive list.
E9003631 ListTapedrive failed!
E9004001 ScanDevice: Option "scan" is missing.
E9004002 ScanDevice: Option "scan" requires a value
E9004003 ScanDevice: Option "scan" has invalid value
E9004004 ScanDevice: Failed to read/get option "scan".
E9004005 ScanDevice: Failed to write/set option "scan".
E9004006 ScanDevice: Unable to scan devices.
E9004021 ScanDevice failed!
E9004401 UseMedchanger: Option "use" is missing.
E9004402 UseMedchanger: Option "use" requires a value
E9004403 UseMedchanger: Option "use" has invalid value
E9004404 UseMedchanger: Failed to read/get option "use".
E9004405 UseMedchanger: Failed to write/set option "use".
E9004411 UseMedchanger: Option "sernum" is missing.
E9004412 UseMedchanger: Option "sernum" requires a value
E9004413 UseMedchanger: Option "sernum" has invalid value
E9004414 UseMedchanger: Failed to read/get option "sernum".
E9004415 UseMedchanger: Failed to write/set option "sernum".
E9004421 UseMedchanger: Option "usetype" is missing.
E9004422 UseMedchanger: Option "usetype" requires a value
E9004423 UseMedchanger: Option "usetype" has invalid value
E9004424 UseMedchanger: Failed to read/get option "usetype".
E9004425 UseMedchanger: Failed to write/set option "usetype".
E9004426 UseMedchanger: Unable to set the intended use of the
changer.
E9004427 UseMedchanger: Unable to get the tape drives associated
with this changer.
E9004428 UseMedchanger: Unable to remove the drive associated with
the changer.
Error Code Error Message