Quantum DXi V1000 - Page 320

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
312 CLI Error Codes
E9004501 UseMedchanger failed!
E9004801 UseTapedrive: Option "use" is missing.
E9004802 UseTapedrive: Option "use" requires a value
E9004803 UseTapedrive: Option "use" has invalid value
E9004804 UseTapedrive: Failed to read/get option "use".
E9004805 UseTapedrive: Failed to write/set option "use".
E9004811 UseTapedrive: Option "sernum" is missing.
E9004812 UseTapedrive: Option "sernum" requires a value
E9004813 UseTapedrive: Option "sernum" has invalid value
E9004814 UseTapedrive: Failed to read/get option "sernum".
E9004815 UseTapedrive: Failed to write/set option "sernum".
E9004821 UseTapedrive: Option "usetype" is missing.
E9004822 UseTapedrive: Option "usetype" requires a value
E9004823 UseTapedrive: Option "usetype" has invalid value
E9004824 UseTapedrive: Failed to read/get option "usetype".
E9004825 UseTapedrive: Failed to write/set option "usetype".
E9004826 UseTapedrive: Unable to set the intended use of the tape
drive.
E9004831 UseTapedrive failed!
E9005201 EnablePtt: Option "enable" is missing.
E9005202 EnablePtt: Option "enable" requires a value
E9005203 EnablePtt: Option "enable" has invalid value
E9005204 EnablePtt: Failed to read/get option "enable".
E9005205 EnablePtt: Failed to write/set option "enable".
E9005211 EnablePtt: Option "wwpn" is missing.
E9005212 EnablePtt: Option "wwpn" requires a value
E9005213 EnablePtt: Option "wwpn" has invalid value
E9005214 EnablePtt: Failed to read/get option "wwpn".
E9005215 EnablePtt: Failed to write/set option "wwpn".
E9005261 EnablePtt failed!
E9005262 Enableptt gc command failed!
E9005263 Enableptt failed up update conf file!
Error Code Error Message