Quantum DXi V1000 - Page 321

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
CLI Error Codes 313
E9005264 Enableptt not supported!
E9005265 No matching FC port to enable!
E9005601 DisablePtt: Option "disable" is missing.
E9005602 DisablePtt: Option "disable" requires a value
E9005603 DisablePtt: Option "disable" has invalid value
E9005604 DisablePtt: Failed to read/get option "disable".
E9005605 DisablePtt: Failed to write/set option "disable".
E9005611 DisablePtt: Option "wwpn" is missing.
E9005612 DisablePtt: Option "wwpn" requires a value
E9005613 DisablePtt: Option "wwpn" has invalid value
E9005614 DisablePtt: Failed to read/get option "wwpn".
E9005615 DisablePtt: Failed to write/set option "wwpn".
E9005661 DisablePtt failed!
E9005662 Disableptt gc command failed!
E9005663 Disableptt failed up update conf file!
E9005664 Disableptt not supported!
E9005665 No matching FC port to disable!
E11000001 Buffer Area is uninitialised.
E11000002 Failed to retrieve VTL Summary!
E11000003 Failed to get node number for the drive!
E11000004 Invalid drive!
E11000005 Failed to open drive stat file!
E11000006 No tape drives found!
E11000007 Invalid VTL !
E11000008 Invalid barcode!
E11000009 VTL: cart does not exist!
E11000010 The given Ethernet Switch does not exist!
E11000011 The given Fibre Channel Switch does not exist!
E11000012 The given Storage Array does not exist!
E11000013 The given FC Adapter does not exist!
E11000014 The status xml file does not exist!
Error Code Error Message