Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
CLI Error Codes 327
E11052811 ShowTicketanalysis: Option "ticketnum" is missing.
E11052812 ShowTicketanalysis: Option "ticketnum" requires a value
E11052813 ShowTicketanalysis: Option "ticketnum" has invalid value
E11052814 ShowTicketanalysis: Failed to read/get option "ticketnum".
E11052815 ShowTicketanalysis: Failed to write/set option "ticketnum".
E11052831 ShowTicketanalysis failed!
E11053201 ShowTicketdetail: Option "show" is missing.
E11053202 ShowTicketdetail: Option "show" requires a value
E11053203 ShowTicketdetail: Option "show" has invalid value
E11053204 ShowTicketdetail: Failed to read/get option "show".
E11053205 ShowTicketdetail: Failed to write/set option "show".
E11053211 ShowTicketdetail: Option "ticketnum" is missing.
E11053212 ShowTicketdetail: Option "ticketnum" requires a value
E11053213 ShowTicketdetail: Option "ticketnum" has invalid value
E11053214 ShowTicketdetail: Failed to read/get option "ticketnum".
E11053215 ShowTicketdetail: Failed to write/set option "ticketnum".
E11053231 ShowTicketdetail failed!
E11053601 CloseallTicket: Option "closeall" is missing.
E11053602 CloseallTicket: Option "closeall" requires a value
E11053603 CloseallTicket: Option "closeall" has invalid value
E11053604 CloseallTicket: Failed to read/get option "closeall".
E11053605 CloseallTicket: Failed to write/set option "closeall".
E11053631 CloseallTicket failed!
E12050001 Analyzer: Seer has no answer!
E12050002 Analyzer: Failed to get the node 'Disk' from seer file.
E12050003 Analyzer: Failed to get the node 'Network' from seer file.
E12050004 Analyzer: Failed to get the tag 'ReadThroughput' from seer
file.
E12050005 Analyzer: Failed to get the tag 'WriteThroughput' from seer
file.
E12050006 Analyzer: Failed to get the tag 'ErrMsg' from seer file.
E12050401 AnalyzeNetwork: Option "analyze" is missing.
Error Code Error Message