Quantum DXi V1000 - Page 337

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
CLI Error Codes 329
E12051231 AnalyzeDisk failed!
E12051232 AnalyzeDisk: System analysis file is already being generated.
E12051233 AnalyzeDisk: Unable to generate system analysis file.
E12051601 GetstatusNetserver: Option "getstatus" is missing.
E12051602 GetstatusNetserver: Option "getstatus" requires a value
E12051603 GetstatusNetserver: Option "getstatus" has invalid value
E12051604 GetstatusNetserver: Failed to read/get option "getstatus".
E12051605 GetstatusNetserver: Failed to write/set option "getstatus".
E12051621 GetstatusNetserver failed!
E12052001 ShowThroughput: Option "show" is missing.
E12052002 ShowThroughput: Option "show" requires a value
E12052003 ShowThroughput: Option "show" has invalid value
E12052004 ShowThroughput: Failed to read/get option "show".
E12052005 ShowThroughput: Failed to write/set option "show".
E12052011 ShowThroughput: Option "disk" is missing.
E12052012 ShowThroughput: Failed to read/get option "disk".
E12052013 ShowThroughput: Failed to write/set option "disk".
E12052021 ShowThroughput: Option "network" is missing.
E12052022 ShowThroughput: Failed to read/get option "network".
E12052023 ShowThroughput: Failed to write/set option "network".
E12052041 ShowThroughput failed!
E13000001 Healthcheck: Failed to retrieve healthcheck names.
E13000002 Healthcheck: Failed to retrieve healthcheck status.
E13000401 StartHealthcheck: Option "start" is missing.
E13000402 StartHealthcheck: Option "start" requires a value
E13000403 StartHealthcheck: Option "start" has invalid value
E13000404 StartHealthcheck: Failed to read/get option "start".
E13000405 StartHealthcheck: Failed to write/set option "start".
E13000421 StartHealthcheck failed!
E13000801 StopHealthcheck: Option "stop" is missing.
E13000802 StopHealthcheck: Option "stop" requires a value
Error Code Error Message