EasyManua.ls Logo

Quantum ONE O2 - User Manual

Quantum ONE O2
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ONE O2 OXYGEN MONITOR
ALARM UNITS
INSTALLATION & OPERATING MANUAL
Revision
Date
Details
1-0
12-09-17
1
ST
ISSUE
Quantum Cryogenics
Quantum Cryogenics
Unit B Cranmere Road
Unit 13 Langley Court Business Park
Okehampton
World’s End
Devon, EX20 1UE
Berkshire, RG20 8RY
T. +44 (0) 1844 339993
F. +44 (0) 1844 339996
Question and Answer IconNeed help?

Do you have a question about the Quantum ONE O2 and is the answer not in the manual?

Quantum ONE O2 Specifications

General IconGeneral
BrandQuantum
ModelONE O2
CategorySecurity System
LanguageEnglish

Summary

SAFETY WARNINGS

INTRODUCTION

Low; Critically Low Models

Defines alarm settings for oxygen deficiency applications.

High; Critically High Models

Defines alarm settings for oxygen enrichment applications.

High; Low Models

Defines alarm settings for combined oxygen applications.

INSTALLATION

OPERATION

Low; Critically Low Operation

Summarizes normal operation and alarm conditions for Low/Critically Low models.

High; Critically High Operation

Summarizes normal operation and alarm conditions for High/Critically High models.

High; Low Operation

Summarizes normal operation and alarm conditions for High/Low models.

MAINTENANCE

Testing and Functionality

Details monthly testing procedures, logging, and evacuation drill recommendations.

Sensor Optimisation

Describes the process for optimizing the sensor using fresh air or calibration gas.

Calibration Procedures

Calibration: Low; Critically Low

Covers sensor calibration steps for Low/Critically Low models using test gas.

Calibration: High; Critically High

Covers sensor calibration steps for High/Critically High models using test gas.

Calibration: High; Low

Covers sensor calibration steps for High/Low models using test gas.

Replacing Sensor and Battery Pack

Removal of Old Pack

Details unscrewing the lid and front plate to access the sensor and battery pack.

Fitting New Sensor-Battery Pack

Explains how to connect and install the new sensor-battery pack.

Post-Replacement Calibration and Testing

Specifies a resting period before calibration and testing after replacement.

Fitting Replacement Label

Instructions for applying the new 'Replace by' label over the old one.

APPENDIX A - TECHNICAL SPECIFICATION

APPENDIX B - QUICK REFERENCE GUIDE

APPENDIX C - WARRANTY STATEMENT

APPENDIX D - EC DECLARATION OF CONFORMITY

APPENDIX E - END OF LIFE DISPOSAL