Quantum QT-750

Chapter 4 User Maintenance
24
Models QT-740 & QT-750 - Operator’s Manual
4. Locate the spring-loaded lever on the right side of the tray bottom. A
spring-loaded plate covers this hole. Press the lever with your right index
finger, lift the cassette tray up slightly and pull the tray away from the
Receptor Cabinet.
Poersch Trays
1. Float the table top fully back.
2. Pull the cassette tray out by the handle until it stops.
3. Grasp the left side of the tray with your left hand.
4. Locate the square block at the back right side of the cassette tray. A
spring-loaded plate is on the front side of the block. While pressing the
plate, pull the tray out from the Receptor Cabinet.