Quantum QTM-8000 - Operation; Filling the Water Basin

To Next Page

To Previous Page

11 | Page Rev. 1

OPERATION

1.) FILLING THE WATER BASIN:

Use Cool Water from the faucet. Fill the water basin until the

top of the black center dome (in the bottom of the basin) is just

covered. Make sure not to over fill. Overfilling or under filling will

reduce the cleaning performance. Never fill the water basin

above the black center dome or above the MAX line. Water

should be replaced when water becomes heavy with dirt, lint,

and action is visibly reduced. MAX Water line is printed on the

water basin.

** The Quantum must always be operated with a properly filled

water basin. Never use dry.