20 | Page Rev. 1
c. Next, turn on power head by disengaging the power head
from the upright position, by placing your foot on top of the
“press” button to unlock the power head from the upright
position.
Next, grasp the wand assembly and pull backward, the power
head will start. Guide the power head slowly back and forth
over carpet with free and easy strokes. Let the power head and
Quantum do the work for you.
** If the power head tangles with loose carpeting, it may stop.
There is a “re-settable” fuse/switch on the power head. Return
the power head to the upright and off position, then reach
down and press the red button to reset the power head.
Continue vacuuming.
To Next Page
Loading...