Install and Secure the QXS-412/424 Chassis
QX and QXS 12- and 24-Drive Rackmount Install Guide 18
Figure 17: Securing front mounting ears
1. Screws: Code C - P/N:01-00000264-00-01 or 01-00000267-00-01 or 01-00000269-00-01
3. Using one #6-32 x 1/4 panhead Phillips screw for each rear bracket, secure the chassis to the
horizontal rail spanning the depth of the rack.
Note:
You can improve screwdriver access by removing the power supplies from the drive chassis, when
securing the chassis into the rack.
To Next Page
Loading...
