Before You Begin QXS-412/424 Rackmount Installation
QX and QXS 12- and 24-Drive Rackmount Install Guide 3
Code Part description Qty
C #10-32 x 3/4, Truss, PLP, SS; or
M5 x 10, PH, PLP2, SS; or
M6 x 10, PH, PLP2, SS
8
D #10-32 x 5/8, FH100, PLP2, SS; or
M5 x 10, FH, PLP2, SS; or
M6 x 10, FH, PLP2, SS
2
E #6-32 x 1/4, PH, PLP, SS,
Patchlock
2
Nuts
F #10-32, UNF - Cage Nut; or
#10-32, UNF - Clip Nut
10
*Hanger fasteners may be pre-installed on the rail’s front and rear mounting flanges (noted in Install QXS-412/424
Hanger Fasteners on page 7).
Fasteners provided vary by rail kit. Alpha codes (in hardware table) correlate to numeric P/Ns within illustrated
procedures.
To Next Page
Loading...
