Quark-Elec QK-A026 - Support and Specifications; Technical Specifications Overview; Further Assistance and Resources

www.quark-elec.com Page
4
of
5
2017
https://www.quark-elec.com/doc/QK-A0xx_GUI_application_note.pdf
This enables the user to specify baud rates for the NMEA interface. The most common settings are 4800
input and 38400 output. It also enables WiFi set-up in both Ad Hoc and Station Mode (p2p or router).
ADDITIONAL INFORMATION AND SUPPORT
Full QK-A026 instructions and troubleshooting details can be found in the full QK-A026/26 Manual here:
https://www.quark-elec.com/product/qk-a026-wireless-ais-gps-receiver/
For additional technical information and other enquiries, please go to the Quark-elec forum at:
https://quark-elec.com/forum/
For sales and purchasing information, please email us: info@quark-elec.com
SPECIFICATION
Item
Specification
Frequency bands
161.975MHz &162.025MHz
Operating temperature
-25°C to +80°C
Storage temperature
-25°C to +85°C
DC supply
5.0.0V(+/-0..2V)
Average supply current (typical
quiescent)
180mA
Maximum supply current(during SMS
transceiver activity)
270mA
AIS receive sensitivity
-105dBm@30%PER
NMEA data format
ITU/ NMEA 0183 format
NMEA output data rate
38.4kbps
WiFi mode
Ad Hoc and Station modes on 802.11 b/g/n
Security
WPA/WPA2
Network Protocols
TCP