Quartz Q16/Q32 System Manual
18 May 2004 Issue 5.00 Page 11
For digital audio it is important to use data cable with a characteristic impedance of 110Ω rather than
audio cable. For error free transmission, care should be taken to ensure the cable losses are
acceptable over the intended length.
The Q32 (2U) Digital Audio Unbalanced AES Frame
This frame can be fitted with asynchronous or synchronous modules in 16x16 or 32x32 matrix sizes
to give four different products, part numbers:
Q32-DA-1616-UA(P) Asynchronous (crash switch)
Q32-DA-3232-UA(P) Asynchronous (crash switch)
Q32-DA-1616-US(P) Synchronous (soft switch and shuffle)
Q32-DA-3232-US(P) Synchronous (soft switch and shuffle)
Synchronous Digital audio routers Q32-DA-1616-US and Q32-DA-3232-US must have an AES or
video reference connected for proper operation. The video or unbalanced AES reference signal is
connected to the BNC reference connector.
On the digital audio main router module 3 links must be correctly set to enable the reference circuits.
AES Unbalanced (BNC) Video (BNC)
LK4=B LK4=B
LK5=A LK5=B
LK6=B LK6=B
To Next Page
Loading...